Proper BEC with 10A output
Power Management
CC BEC (Battery Eliminator Circuit) is a small device that eliminates the need for a receiver battery. It draws voltage from the motor batteries and drops it to a voltage level that is suitable for your receiver and servos. This is required in applications which use high power servos, where the ESC does not have an internal BEC, or the existing BEC is inadequate.
The CC BEC is designed to operate at up to 6S LiPo with a 10A* peak servo load. Generally used for cars utilizing high powered digital servos. It is also useful in smaller airplanes using 4 standard non-digital servos or 6 micro servos. Perfect for 450 size or smaller helis.
Spec:
- Max load: 10A peak / up to 12V input = 7A & up to 24V input = 5A
- Volts: 5-25V / 2-6S LiPo
- Adjustable output: 4.8-9V
- Size: 30 x 15 x 10 mm
- Weight: 11 g
*Weight without wires
**Ratings are determined with a 5mph airflow on the BEC.
NOTE!
1. Ratings are determined with a 5mph airflow at 25° C (77° F).
2. Adjustable Output Voltage may be set with Castle Link (sold separately).
3. Weight with full length wires, power wires may be shortened to save weight depending on application.
